Tuesday, November 17, 2009
December Stitches and Staples
Monday, November 9, 2009
Crayon Caddys
2 5 x 16 1/2 pieces of fabric. This is for the outside and inside. I used flannel.
1 6 x 16 1/2 piece of fabric folded in half lengthwise and pressed (for the pocket)
1 5 x 16 1/2 piece of lightweight fusible interfacing or lightweight batting (Use the batting if you want a "puffy" look.
30 inches of ribbon
1 16 count pkg of crayons
Thread to coordinate with fabric
scissors
pins
sewing machine
Optional
pkg of ric rac trim
If you would like to make these to hold a 24 count box change all the 16 1/2's to 24 1/2. You basically need 1 inch per crayon and a 1/4 inch seam allowance per side.
Instructions:
1. Iron on interfacing to the wrong side of the 5 x 16 1/2 piece of fabric that you want to be on the inside. If you are using batting just pin it on the back.
2. Line up the bottom edges of the folded piece and the piece with the interfacing (or batting), pin together. Starting over from the edge 1 1/4 inches sew lined parallel with the the edge starting for the top of the crayon pocket, back-stitching at the top to reinforce. Sew the lines one inch apart across the pocket. You will have 1 1/4 inches on each side with 14 1 inch pockets between. (If you are doing a 24 count you will have the same but with 22 -1 inch pockets in between.
3.If you want to use ric rac, pin it around the edge of the piece that you just sewed the pockets on. Fold the ribbon in half and pin it on the right edge with the folded end facing out and the loose ends on the inside.
4. Pin remaining piece of 5 x 16 1/2 inch fabric right sides together with the pocket piece. Sew around edges with 1/4 inch seam allowance. Leave about 3 inches across bottom for turning.
5. Trim corners, turn, press and top stitch being careful to catch all layers of the opening to close.
6. Slip crayons inside, roll up and tie shut.
Super simple but oh so very cute!!
Friday, October 23, 2009
Quiet Books
1 4x6 photo album. (I bought mine at Walmart for $1 you will find them by the scrap booking materials. You can also find these at most craft stores or dollar stores for around the same price.) If you would like to do your quiet book in a full size with the 8 1/2 x 11 pages you can purchase your binders at Walmart for $1-$3 or the D.I always has some for around $1
2. 1 12x12 piece of card stock (this will cost you at most .50 if you buy a single sheet at Joann's or Michaels. For the larger binders you will need 2 8 1/2 x 11 pieces of card stock these are around .35 to .50 a sheet at the scrapbook and craft stores.
3. a print out of the alphabet pages. You will need to go to this link to print it out. http://www.theideadoor.com/PDF%20Files/Quiet%20Book/GospelQuietBook.pdf
The link will have it as an 8 1/2 x 11. You can print it this way if you would like your quiet book to go into a larger binder. To get it to print to fit the 4x6 book all you will need to do is select the print button. in the left corner of your screen. When it pulls up the printer box select page scaling. From the drop down box select multiple pages per sheet and you should see in the preview screen that you now have 4 pages printing on one sheet. You will be able to print your whole book in 7 pages rather then 27 pages.
4. you will also need a pictures of the mom and dad and grandparents of the child that you are giving the to. These go on the "D", "M", and "G" pages.
To assemble you book all you will need to do is cut out 2 4x6 pieces from your card stock. You can decorate these however you wish and then slip them into the front and back of your book. These become your cover pages. Then cut out all of the alphabet pages into 4x6 pieces and slide them in. Put pictures on the pages
Thursday, September 24, 2009
Classes Postponed
Wednesday, September 9, 2009
October class
Wednesday, August 19, 2009
September Project
1 yard of washable material. I love duck cloth or a poly cotton blend. These are thick and wash great!! I usually get it at walmart for $1.50 a yard. Also a note. 1 yard will make 1 adult size apron. 1 yard at 60" wide will make 4 child size aprons. you should be able to make between 2-4 child sized aprons out of 1 yard. It will just depend on your width.
2.Cut out 1 piece of ribbon 25" long (neck piece) Cut 2 pieces of ribbon at 22" long(ties)
Child apron(not pictured) cut 2 pieces of ribbon at 8" long (neck pieces) cut 2 pieces of ribbon at 12" long (ties)
3.In curved sides of apron press under 1/4" with your iron. This will help to keep material from fraying in wash.
Repeat steps 3 and 4 on bottom of apron.
5.Now we are attaching the neck strap. With the right side of your apron facing you place the edges of your ribbon in the corners securing them with small pieces of heat-n-bond. It should look like this. It is important that you let the heat-n-bond cool before trying to pick the ties up. If you don't they will not adhere properly and you will have slipping ties!
6. follow steps 3 and 4 again for seam. Remember to allow time to cool before picking up.
7. Now we will add the side ties. You will follow the same steps as you did for the neck strap. Put your apron right side facing you. (As shown in the picture below) Put ribbon in the corners securing with small pieces of heat-n-bond. Hem as before following steps 3 & 4 (and yes that is my foot in the picture. I just didn't notice it until I was writing the sentence just before this one!)
Finish up by adding buttons at the neck. If you are doing the child size add your snaps to each end of your neck ties.
All right you are all done! See I told you these would be simple. Of course this is a very basic pattern you could add pockets and all sort of cute things on these to personalize them! Have fun making tons of these. I'm warning you they are addicting!
Sunday, August 16, 2009
Reciepe Card holder
1 Wooden frame. 5x7 for recipe card size. (I purchased mine from the dollar store)
piece of chicken wire to fit opening. (Lowes 10'x 24" was $3-4 you can purchase some from me for 1penny an inch)
Staple gun
hammer
decorative paper, wrapping paper, wall paper . . . I think that you get the idea. Cut to fit in your frame
buttons or other type of embellishments if wanted and glue to adhere them
mod-podge and paint brush
OK so lets get started.
1. So to start off you will want to remove the back and glass from your frame. You can throw the glass out but keep the backing you will need this later!
2. Cut a piece of chicken wire to fit the inside of your frame. Staple and hammer into place one side at a time pulling tight and shaping the wire as you go. Make sure that you staple all "loose ends" you don't want your wire to unravel when you trim it. Use your wire cutters to curl in your ends so that you have no sharp edges. The back of your frame should look something like this at this point. (Just a note -make sure that your chicken wire is going in the same direction pictured. If not your reciepe card may not fit.)


